PROMASEAL®-A

ADVANTAGES

  • Can be painted
  • Good adhesion to various substrates

Fire Stopping Acrylic

PROMASEAL®-A is an acrylic based, single component fire stopping sealant. Joints without movement can be sealed quickly thanks to its outstanding application qualities. A common emulsion paint can be used to colour the joints.

General Technical Properties
< #Back#

GENERAL TECHNICAL DATA

 Colour  white/grey
 Consistency  paste
 Density  wet : 1.6 ± 0.2 g/cm³
 dry : 1.8 ± 0.2 g/cm³
 Solid Content  86 ± 5 wght.%
 Ash Content  approx. 70 % (600 °C, 15 minutes)
 Movement Capabilities  elongation minimum 7.5%
 compression minimum 7.5%

GENERAL TECHNICAL DATA

 Colour  white/grey
 Consistency  paste
 Density  wet : 1.6 ± 0.2 g/cm³
 dry : 1.8 ± 0.2 g/cm³
 Solid Content  86 ± 5 wght.%
 Ash Content  approx. 70 % (600 °C, 15 minutes)
 Movement Capabilities  elongation minimum 7.5%
 compression minimum 7.5%
Additional Data
< #Back#

PACKAGING

  • 310 ml cartridges, 25 tubes per carton, 1200 tubes/pallet

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months
  • Once opened, containers should be finished swiftly

PACKAGING

  • 310 ml cartridges, 25 tubes per carton, 1200 tubes/pallet

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months
  • Once opened, containers should be finished swiftly
Health & Safety
< #Back#

SAFETY INSTRUCTIONS

  • Keep out of reach of children
  • Avoid contact with food or beverages
  • Please refer to the safety data sheet for additional advice

SAFETY INSTRUCTIONS

  • Keep out of reach of children
  • Avoid contact with food or beverages
  • Please refer to the safety data sheet for additional advice
Test Certificate
< #Back#

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.