en
downloadsDownload IconfaqGlobe iconLinks
Home About Us  
Applications Products References OEM PROMAFOUR® Locations Contacts  
Menu
  1. Home - Promat Baltic Countries
  2. Products
  3. Products
  4. PROMATECT®-L500

PROMATECT®-L500

  • PROMATECT-L & L500

ADVANTAGES

  • Resistant to the effects of moisture
  • Not physically deteriorate when used in damp or humid conditions
  • Performance characteristics are not degraded by age or moisture.

Matrix Engineered Mineral Board

PROMATECT®-L500 is a lightweight mineral matrix engineered board which is off-white/beige in colour and has a smooth sanded surface on one face with a lightly honeycombed texture on the reverse face.

PROMATECT®-L500 is chemically inert and is resistant to diluted acids and alkalis. Boards should be protected where high chemical concentrations are likely to occur.

Applications

General Technical Data
< #Back#

GENERAL TECHNICAL DATA

Designation Calcium Silicate Fire Protective Board
Combustibility DIN 4102, part 1
BS 476, part 4
AS 1503, part 1
EN 13501-1 (WFRGent Classification report 11529C) 		Non-combustible
Board format (length x width) mm 1200 x 2500
Tolerance on length and width mm ± 3
Board thickness mm 20, 25, 30, 35, 40, 50, 52, 60
Tolerances on thickness mm ± 0.5
Density (nominal, oven dry) Kg/m3 ca. 500
Alkalinity (approximate) pH ca. 9
Thermal conductivity λ W/m°K ca.0.09 (at 20°C)
Water absorption g/cm3 0.77
Moisture diffusion resistance μ ca. 3.2
Typical moisture content (at EMC*) % 3 - 5
Surface conditions Front face: smooth, sanded
Back face: lightly honeycombed textured
Colour: yellowish
Storage Store on flat surface, in a dry area.

*EMC = Equilibrium moisture content

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

GENERAL TECHNICAL DATA

Designation Calcium Silicate Fire Protective Board
Combustibility DIN 4102, part 1
BS 476, part 4
AS 1503, part 1
EN 13501-1 (WFRGent Classification report 11529C) 		Non-combustible
Board format (length x width) mm 1200 x 2500
Tolerance on length and width mm ± 3
Board thickness mm 20, 25, 30, 35, 40, 50, 52, 60
Tolerances on thickness mm ± 0.5
Density (nominal, oven dry) Kg/m3 ca. 500
Alkalinity (approximate) pH ca. 9
Thermal conductivity λ W/m°K ca.0.09 (at 20°C)
Water absorption g/cm3 0.77
Moisture diffusion resistance μ ca. 3.2
Typical moisture content (at EMC*) % 3 - 5
Surface conditions Front face: smooth, sanded
Back face: lightly honeycombed textured
Colour: yellowish
Storage Store on flat surface, in a dry area.

*EMC = Equilibrium moisture content

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

Mechanical Properties
< #Back#

MECHANICAL PROPERTIES

Bending strength (longitudinal direction) N/mm2 3.0
Tensile strength (longitudinal direction) N/mm2
 1.2
Compressive strength (perpendicular to the surface) N/mm2
 5.5

Screw pull out resistance: screwed in the surface

quick fix screw - 3.9 x 45 20mm deep
screw insert (Rampa) 15mm deep

330N
301N
Screw pull out resistance: screwed in the edge
 quick fix screw - 3.9 x 45 20mm deep
quick fix screw - 3.9 x 45 30mm deep
 342N
510N

MECHANICAL PROPERTIES

Bending strength (longitudinal direction) N/mm2 3.0
Tensile strength (longitudinal direction) N/mm2
 1.2
Compressive strength (perpendicular to the surface) N/mm2
 5.5

Screw pull out resistance: screwed in the surface

quick fix screw - 3.9 x 45 20mm deep
screw insert (Rampa) 15mm deep

330N
301N
Screw pull out resistance: screwed in the edge
 quick fix screw - 3.9 x 45 20mm deep
quick fix screw - 3.9 x 45 30mm deep
 342N
510N
Board Weights
< #Back#

BOARD WEIGHTS

Thickness (mm) Dry weight (Kg/m2) Weight (Kg/m2) at 20°C, 65% RH
20 ca. 10.0 ca. 10.5
25 ca. 12.5 ca. 13.1
30 ca. 15.0 ca. 15.8
35 ca. 17.5 ca. 18.4
40 ca. 20.0 ca. 21.0
50 ca. 25.0 ca. 26.3
52  ca. 26.0
 ca. 27.4
60  ca. 30.0
 ca. 31.5

BOARD WEIGHTS

Thickness (mm) Dry weight (Kg/m2) Weight (Kg/m2) at 20°C, 65% RH
20 ca. 10.0 ca. 10.5
25 ca. 12.5 ca. 13.1
30 ca. 15.0 ca. 15.8
35 ca. 17.5 ca. 18.4
40 ca. 20.0 ca. 21.0
50 ca. 25.0 ca. 26.3
52  ca. 26.0
 ca. 27.4
60  ca. 30.0
 ca. 31.5

Health & Safety
< #Back#

PROCESSING & MACHINING

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

WASTE DISPOSAL

Refer to local legislation

If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

PROCESSING & MACHINING

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects. For more information: request Safety Data Sheet.

WASTE DISPOSAL

Refer to local legislation

If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Documents
< #Back#

Fire protection boards

Calcium silicate boards

Calcium silicate boards

Fire protection boards

Calcium silicate boards

Calcium silicate boards

Send hard copy

Download


#Project related info#

Send by mail


#Project related info#