PROMASTOP®-CC

ADVANTAGES

  • Suitable for use in damp rooms (i.e. high humidity levels, splashing water, etc.)
  • Excellent adhesive properties
  • Minimal section insulation for all cable groups

Fire Stopping Coating

PROMASTOP®-CC is a water based ‘hybrid’ fire stopping coating. It combines the positive qualities of intumescent and ablative coatings.
In the field of fire stopping penetrations, PROMASTOP®-CC provides reliable protection against the spread of smoke and fire, due to its foaming effect and simultaneous surface ceramization.

Applications

General Technical Properties
< #Back#

GENERAL TECHNICAL PROPERTIES

 Colour  dark grey 
 Density  approx. 0,25 g/cm3
 Dimension  200 mm x 120 mm x 60 mm
(w x l x h)
 Expansion ratio (loaded)  approx. 1:2
 Expansion temperature  approx. 150 °C
 Environmental compatibility  solvent-free, no odour,
 environmentally friendly

GENERAL TECHNICAL PROPERTIES

 Colour  dark grey 
 Density  approx. 0,25 g/cm3
 Dimension  200 mm x 120 mm x 60 mm
(w x l x h)
 Expansion ratio (loaded)  approx. 1:2
 Expansion temperature  approx. 150 °C
 Environmental compatibility  solvent-free, no odour,
 environmentally friendly
Additional Data
< #Back#

PACKAGING

  • 6 pieces per carton; 640 pieces per pallet

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Shelf life at least 12 months

PACKAGING

  • 6 pieces per carton; 640 pieces per pallet

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Shelf life at least 12 months
Health & Safety
< #Back#

SAFETY INSTRUCTIONS

  • Keep away from children 
  • Avoid contact with food 
  • Only for use with protective gloves and eye protection; in the event of contact with eyes, rinse with water immediately 
  • Please refer to the safety data sheet for additional advice

SAFETY INSTRUCTIONS

  • Keep away from children 
  • Avoid contact with food 
  • Only for use with protective gloves and eye protection; in the event of contact with eyes, rinse with water immediately 
  • Please refer to the safety data sheet for additional advice
Test Certificate
< #Back#

TEST CERTIFICATE / APPROVAL

  • EN 13501-2
  • EN 13501-3
  • FM approved
  • EN 50266-1-1: 01 and 2-2: 01
  • IEC 60331-11: 01 and 21: 01

TEST CERTIFICATE / APPROVAL

  • EN 13501-2
  • EN 13501-3
  • FM approved
  • EN 50266-1-1: 01 and 2-2: 01
  • IEC 60331-11: 01 and 21: 01
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.