PROMASEAL®-A Spray

ADVANTAGES

  • 60% movement capability
  • Excellent adhesion qualities
  • Moisture resistant once dry

Fire Stopping Coating

PROMASEAL®-A Spray is an acrylic based, single component fire stopping sealant. It forms a flexible seal once dry, is very suitable for accommodating movement and is also resistant to moisture.

Applications

General Technical Properties
< #Back#

A GENERAL

 Colour grey 
 Density 1.35 g/cm³ solid, flexible
 Viscosity  approx. 60.000 cP
 Solid Content  approx. 70 %
 Ash Content  approx. 30 %
 Shore A  40
 Tensile Strength  0.35 MPa
 Elongation before failure  approx. 250 %

A GENERAL

 Colour grey 
 Density 1.35 g/cm³ solid, flexible
 Viscosity  approx. 60.000 cP
 Solid Content  approx. 70 %
 Ash Content  approx. 30 %
 Shore A  40
 Tensile Strength  0.35 MPa
 Elongation before failure  approx. 250 %
Additional Data
< #Back#

PACKAGING

  • 12 kg plastic buckets – 33 buckets or 396 kg/pallet 

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months 
  • Once opened, containers should be finished swiftly

PACKAGING

  • 12 kg plastic buckets – 33 buckets or 396 kg/pallet 

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months 
  • Once opened, containers should be finished swiftly
Health & Safety
< #Back#

SAFETY INSTRUCTIONS

  • Keep out of reach of children
  • Avoid contact with food or beverages
  • Please refer to the safety data sheet for additional advice

SAFETY INSTRUCTIONS

  • Keep out of reach of children
  • Avoid contact with food or beverages
  • Please refer to the safety data sheet for additional advice
Test Certificate
< #Back#

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501-2/classification reports
  • ÖNORM B 3807
  • ASTM/UL

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501-2/classification reports
  • ÖNORM B 3807
  • ASTM/UL
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Documents
< #Back#

Fire stopping

Promaseal

Promaseal

Fire stopping

Promaseal

Promaseal