PROMASEAL®-AG

  • PROMASEAL AG-fire stopping product

ADVANTAGES

  • Expands under pressure
  • Good adhesion on various substrates
  • Can be painted

Fire Stopping Mastic

PROMASEAL®-AG is an acrylic based, intumescent, single component fire stopping sealant. It creates high pressure on expansion and allows the sealing of combustible pipes (up to ø 50 mm) and combustible insulation included even in soft penetration.

Applications

General Technical Properties
< #Back#

GENERAL TECHNICAL DATA

 Colour  grey 
 Consistency  paste
 Density  wet : 1.5 ± 0.2 g/cm3
 dry : 1.6 ± 0.2 g/cm3
 Expansion ratio  approx. 1:13 (550 °C)
 Solid Content  84 ± 5 wght.%
 Ash content  approx. 60 % (550 °C)
 Expansion pressure  approx. 0.9 N/mm2

GENERAL TECHNICAL DATA

 Colour  grey 
 Consistency  paste
 Density  wet : 1.5 ± 0.2 g/cm3
 dry : 1.6 ± 0.2 g/cm3
 Expansion ratio  approx. 1:13 (550 °C)
 Solid Content  84 ± 5 wght.%
 Ash content  approx. 60 % (550 °C)
 Expansion pressure  approx. 0.9 N/mm2
Additional Data
< #Back#

PACKAGING

  • 310 ml cartridges, 24 tubes per carton, 1440 tubes/ pallet

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months
  • Once opened, containers should be finished swiftly

PACKAGING

  • 310 ml cartridges, 24 tubes per carton, 1440 tubes/ pallet

Subject to change!

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months
  • Once opened, containers should be finished swiftly
Health & Safety
< #Back#

SAFETY INSTRUCTIONS

  • Keep out of reach of children
  • Avoid contact with food or beverages
  • Please refer to the safety data sheet for additional advice

SAFETY INSTRUCTIONS

  • Keep out of reach of children
  • Avoid contact with food or beverages
  • Please refer to the safety data sheet for additional advice
Test Certificate
< #Back#

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501-2/classification reports

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501-2/classification reports
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Send hard copy

Download


#Project related info#

Send by mail


#Project related info#