PROMASEAL®-S

ADVANTAGES

• Embrittlement-proof, non-ageing and weatherproof
• Non-sensitive to chemicals
• May expand in contact with solvents, greases, oils and fuels, but will not dissolve


Fire Stopping Silicone

PROMASEAL®-S is an elastic one-component fire stopping silicone.
Due to its flexibility, PROMASEAL®-S is suitable for accommodation of movement and external use.

A general
< #Back#

GENERAL TECHNICAL PROPERTIES

Colour grey
Consistency paste-like
Spec. weight 1.2 ± 0.2g/cm³
Reaction to fire B1, slowly combustible
Hardener system neutral
Elastic recovery > 80%
Temperature resistance -40°C to +80°C
Elongation before failure > 250%
Tensile Strength approx. 0.25N/mm2
Shore A Hardness approx. 22
Full hardening time 2mm/24h

GENERAL TECHNICAL PROPERTIES

Colour grey
Consistency paste-like
Spec. weight 1.2 ± 0.2g/cm³
Reaction to fire B1, slowly combustible
Hardener system neutral
Elastic recovery > 80%
Temperature resistance -40°C to +80°C
Elongation before failure > 250%
Tensile Strength approx. 0.25N/mm2
Shore A Hardness approx. 22
Full hardening time 2mm/24h
Additional Data
< #Back#

PACKAGING

  • 310 ml cartridges, 24 tubes per carton, 1440 tubes/ pallet

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months
  • Once opened, containers should be finished swiftly

SAFETY INSTRUCTIONS


  • Keep out of reach of children
  • Avoid contact with food and beverages
  • Please refer to the safety data sheet for additional advice

PACKAGING

  • 310 ml cartridges, 24 tubes per carton, 1440 tubes/ pallet

STORAGE REQUIREMENTS

  • Store in cool and dry conditions
  • Protect from heat and frost
  • Shelf life of original sealed containers at least 12 months
  • Once opened, containers should be finished swiftly

SAFETY INSTRUCTIONS


  • Keep out of reach of children
  • Avoid contact with food and beverages
  • Please refer to the safety data sheet for additional advice
Test Certificate
< #Back#

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501-2/classification reports
  • ÖNORM B 3807

TEST CERTIFICATE / APPROVAL

  • EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports
  • EN 1366-4 (joints), EN 13501-2/classification reports
  • ÖNORM B 3807
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Documents
< #Back#

Fire stopping

Promaseal

Promaseal

Fire stopping

Promaseal

Promaseal