PROMATECT®-H

  • PROMATECT-H

ADVANTAGES

  • resistant to the effects of moisture
  • not physically deteriorate when used in damp or humid conditions
  • performance characteristics are not degraded by age or moisture.

Matrix Engineered Mineral Board

PROMATECT®-H is a non-combustible matrix engineered mineral board reinforced with selected fibres and fillers. It is formulated without organic fibres and does not contain formaldehyde.

PROMATECT®-H is off-white in colour and has a smooth finish on one face with a sanded reverse face. The board can be left plain or can be easily finished with paints.

Applications

General Technical Data
< #Back#

GENERAL TECHNICAL DATA

Product generic description non-combustible, fire resisting calcium silicate board
Combustibility DIN 4102, Part 1
BS 476, Part 4
EN 13051-1:A1
(Classification Report WFRGent 11527C) 		Non-combustible
Board format (length x width) mm 1250 x 2500
Tolerance on length and width mm ± 0.3
Board thickness mm 6, 8, 10, 12, 15, 20, 25
Tolerances on thickness mm 6 - 12 mm
15 - 20 mm
> 20mm 		± 0.5
± 1.0
± 1.5
Density (nominal, oven dry) Kg/m3 ca. 870
Alkalinity (approximate) pH 12
Thermal conductivity λ W/m°K ca.0.175 (at 20°C)
Water absorption g/cm3 0.50
Moisture diffusion resistance μ ca. 20
Typical moisture content (at EMC*) % 5 - 10
Surface conditions Front face: smooth, unsanded
Back face: textured and or sanded
Colour: beige - white
Storage Store on flat surface, in a dry area.

*EMC = Equilibrium moisture content

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

GENERAL TECHNICAL DATA

Product generic description non-combustible, fire resisting calcium silicate board
Combustibility DIN 4102, Part 1
BS 476, Part 4
EN 13051-1:A1
(Classification Report WFRGent 11527C) 		Non-combustible
Board format (length x width) mm 1250 x 2500
Tolerance on length and width mm ± 0.3
Board thickness mm 6, 8, 10, 12, 15, 20, 25
Tolerances on thickness mm 6 - 12 mm
15 - 20 mm
> 20mm 		± 0.5
± 1.0
± 1.5
Density (nominal, oven dry) Kg/m3 ca. 870
Alkalinity (approximate) pH 12
Thermal conductivity λ W/m°K ca.0.175 (at 20°C)
Water absorption g/cm3 0.50
Moisture diffusion resistance μ ca. 20
Typical moisture content (at EMC*) % 5 - 10
Surface conditions Front face: smooth, unsanded
Back face: textured and or sanded
Colour: beige - white
Storage Store on flat surface, in a dry area.

*EMC = Equilibrium moisture content

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

Mechanical Properties
< #Back#

MECHANICAL PROPERTIES

Bending strength (longitudinal direction) N/mm2 7.6
Tensile strength (longitudinal direction) N/mm2
 4.8
Compressive strength (perpendicular to the surface) N/mm2
 9.3

Screw pull out resistance: screw into board surface - 15mm deep

quick fix screw - 3.9 x 55
quick fix screw - 4.0 x 40
quick fix screw - 4.5 x 50
timber screw - 3.9 x 55
screw inserts (Rampa)

624N
584N
581N
550N
350N
Bolt pull through resistance (board thickness = 25mm) Bolt M8, washer diameter 30mm 3.220N

MECHANICAL PROPERTIES

Bending strength (longitudinal direction) N/mm2 7.6
Tensile strength (longitudinal direction) N/mm2
 4.8
Compressive strength (perpendicular to the surface) N/mm2
 9.3

Screw pull out resistance: screw into board surface - 15mm deep

quick fix screw - 3.9 x 55
quick fix screw - 4.0 x 40
quick fix screw - 4.5 x 50
timber screw - 3.9 x 55
screw inserts (Rampa)

624N
584N
581N
550N
350N
Bolt pull through resistance (board thickness = 25mm) Bolt M8, washer diameter 30mm 3.220N
Board Weights
< #Back#

BOARD WEIGHTS

Thickness (mm) Dry weight (Kg/m2) Weight (Kg/m2) at 20°C, 65% RH
6 ca. 5.4 ca. 5.7
8 ca. 7.2 ca. 7.6
10 ca. 9.0 ca. 9.5
12 ca. 10.8 ca. 11.5
15 ca. 13.1 ca. 13.9
20 ca. 17.4 ca. 18.5
25  ca. 21.8
 ca. 23.1

BOARD WEIGHTS

Thickness (mm) Dry weight (Kg/m2) Weight (Kg/m2) at 20°C, 65% RH
6 ca. 5.4 ca. 5.7
8 ca. 7.2 ca. 7.6
10 ca. 9.0 ca. 9.5
12 ca. 10.8 ca. 11.5
15 ca. 13.1 ca. 13.9
20 ca. 17.4 ca. 18.5
25  ca. 21.8
 ca. 23.1

Health & Safety
< #Back#

PROCESSING & MACHINING

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects.

WASTE DISPOSAL

Refer to local legislation

If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

PROCESSING & MACHINING

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects.

WASTE DISPOSAL

Refer to local legislation

If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Documents
< #Back#

Fire protection boards

Calcium silicate boards

Calcium silicate boards

Fire protection boards

Calcium silicate boards

Calcium silicate boards

Send hard copy

Download


#Project related info#

Send by mail


#Project related info#